Servo motors
Injection Moulding Servomotors
Servo pumps combine hydraulic power with an electrically controlled actuator. Using energy only as needed at part load, 'Mark' servo motors integrated with pump and controller significantly cut an injection moulding machine's energy consumption. Retrofits are possible through partners without adapting the control system.
Applications: Injection moulding machines, presses, hydraulic machines
Benefits
- Considerable reduction in energy costs
- Payback usually within 1 year
- Better hydraulic control with integrated closed loop
- Plug and play connection to the machine controller
- Less heating, less cooling, more compact machine
- Lower noise
Technical data
| IEC frame | Rated rpm | Rated torque | Rated kW |
|---|---|---|---|
| 100 L | 1500 to 3000 | 40 Nm | 12.5 |
| 112 L | 2000 to 2400 | 60 Nm | 15.0 |
| 132 S / 132 | 1500 to 2400 | 90 Nm | 22.0 |
| 132 L / 160 M | 2000 to 2400 | 120 Nm | 30.0 |
| 160 L | 1500 to 2000 | 180 Nm | 37.0 |
Specification
- IP54 enclosure, Class H insulation
- Thermistor / thermal switch winding protection
- Forced air cooling by axial blower
- Cast iron frame, foot-cum-flange
- Deep groove ball bearings
- Incremental / SinCos encoder or resolver at NDE
- 8 / 6 poles, 380 V max, 3 phase
Need this for your machine?
Also in Servo motors